EM-63

ENGINE MECHANICAL - Cylinder Head (3S-GTE)

EM-61  EM-62  EM-63  EM-64  EM-65  EM-66  EM-67  EM-68  EM-69  EM-70  EM-71
REMOVAL OF CYLINDER HEAD
(See pages EM-61 and EM-62)
1.  DISCONNECT CABLE FROM NEGATIVE TERMINAL OF BATTERY

CAUTION:  Work must be started after approx. 20 seconds or longer from the time the ignition switch is turned to the "LOCK" position and the negative (-) terminal cable is disconnected from the battery.

2.  DRAIN ENGINE COOLANT (See page CO-6)

3.  REMOVE ENGINE UNDER COVERS

4.  REMOVE ENGINE HOOD SIDE PANELS

5.  REMOVE SUSPENSION UPPER BRACE
(See step 8 on page EM-134)

6.  DISCONNECT ACCELERATOR CABLE FROM THROTTLE BODY

7.  REMOVE CRUISE CONTROL ACTUATOR (w/ CRUISE CONTROL SYSTEM) AND ACCELERATOR LINKAGE
(See step 13 on page EM-135)
em8948.gif (17047 bytes) 8.  REMOVE AIR CLEANER CAP
(See step 9 on page EM-134)

9.  DISCONNECT GROUND STRAP CONNECTOR

10.  DISCONNECT HOSES
(a)  Brake booster vacuum hose from intake manifold
em9073.gif (15854 bytes) (b)  Turbocharging pressure sensor hose from intake manifold
em9031.gif (22090 bytes) (c)  A/C VSV vacuum hose from intake manifold

(d)  A/C VSV air hose from No.2 air tube