EM-70

ENGINE MECHANICAL - Cylinder Head (3S-GTE)

EM-61  EM-62  EM-63  EM-64  EM-65  EM-66  EM-67  EM-68  EM-69  EM-70  EM-71
fi9054.gif (18816 bytes) 33.  REMOVE INTAKE MANIFOLD AND T-VIS VALVE
Remove the four bolts, three nuts, intake manifold, T-VIS VSV and two gaskets.

34.  REMOVE DELIVERY PIPE AND INJECTORS
      (See steps 9, 13 to 15 on pages FI-111 and FI-112)
em8968.gif (14008 bytes) 35.  REMOVE CYLINDER HEAD COVER
Remove the ten screws, seal washers, head cover and two gaskets.
36.  REMOVE CAMSHAFT TIMING PULLEYS
      (See steps 9 to 21 on pages EM-27 to EM-29)

37.  REMOVE NO.1 IDLER PULLEY
      (See step 26 on page EM-31)
em8876.gif (20468 bytes) 38.  REMOVE NO.3 TIMING BELT COVER
Remove the five bolts and timing belt cover.
em8877.gif (16725 bytes) HINT:
  • Support the timing belt, so that the meshing of the crankshaft timing pulley and timing belt does not shift.
  • Be careful not to drop anything inside the timing belt cover.
  • Do not allow the timing belt to come into contact with oil, water or dust.