EM-135

ENGINE MECHANICAL - Cylinder Block (3S-GTE)

EM-134  EM-135  EM-136  EM-137  EM-138  EM-139  EM-140  EM-141  EM-142  EM-143
em8761.gif (15424 bytes) 13. REMOVE CRUISE CONTROL ACTUATOR (w/ CRUISE CONTROL SYSTEM) AND LINKAGE
(a)  Remove the two screws and actuator cover.
(b)  Remove the screw and accelerator linkage cover.
(c)  Remove the three bolts and actuator.
(d)  Disconnect the actuator connector.
(e)  Remove the three bolts and accelerator linkage.
(f)  Disconnect the cable from the accelerator linkage.
em8948.gif (17047 bytes) 14. DISCONNECT BRAKE BOOSTER VACUUM HOSE

15. DISCONNECT GROUND STRAP CONNECTOR
em8883.gif (7044 bytes) 16. REMOVE CHECK CONNECTOR AND TURBOCHARGING PRESSURE SENSOR
em9031.gif (22090 bytes) 17. REMOVE INJECTOR SOLENOID RESISTOR, FUEL PUMP RELAY, FUEL PUMP RESISTOR AND A/C VSV
(a)  Disconnect the following connectors:
      - Solenoid resistor connector
      - Fuel pump relay connector
      - Fuel pump resistor connector
      - A/C VSV connector
(b)  Disconnect the following hoses:
      (1)  A/C VSV air hose from No.2 air tube
      (2)  A/C VSV vacuum hose from intake manifold
em8633.gif (10284 bytes) (c)  Remove the two bolts, A/C VSV, the solenoid resistor and fuel pump relay, fuel pump resistor assembly.