6. INSTALL QUARTER AIR INLET
GARNISH
(a) Tap the garnish and fix it in place with the clip.
(b) Install the nut.
7. INSTALL MOULDING ALONG
BODY PRESS LINE
(a) Align the bosses on the moulding with the body holes,
and push the moulding to the body.
(b) Install the screw to the quarter outside moulding.
NOTICE:
- Be sure that the body and moulding are heated to the proper temperature.
- Do not depress the adhesive-coated parts excessively, just hold them down with your thumb.
- Scrape off any overflowing adhesive with a plastic spatula and clean the surface with a dry rag.
- After installation, do not wash the vehicle for 24 hours.