BO-25

BODY - Moulding

<<previous

next>>
INSTALLATION OF WINDSHIELD MOULDING

(See page BO-24)

1.  CUT ADHESIVE AT MOULDING INSTALLATION AREA
Using a knife, cut off the adhesive around the moulding installation area.

2.  APPLY ADHESIVE AT MOULDING INSTALLATION AREA

3.  INSTALL WINDSHIELD MOULDING
Place the moulding onto the body and tap it by hand.
4.  INSTALL COWL LOUVER
(a)  Install the cowl louver with eleven screws.
(b)  Install two covers.

5.  INSTALL WIPER ARMS
(a)  Install two wiper arms with two nuts.
(b)  Install two caps.